NEXEDGE VHF Digital & FM Mobile Radio
Kenwood NX-720H/NX-820H Features
- Frequency Range
- VHF: 136-174 MHz (NX-720(G) / 720H(G))
- UHF: 450-520 MHz, 400-470 MHz, 350-400 MHz (NX-820(G) / 820H(G))
- 800 MHz: RX: 851-870 MHz, TX: 806-825 / 851-870 MHz (NX-920(G))
- RF Output (Operation guaranteed for 1-5 W)･
- VHF: 5-25 W (NX-720(G) for Europe)
- 5-30 W (NX-720(G))
- 5-30-50 W (NX-720H(G))
- UHF: 5-25 W (NX-820(G) for Europe)
- 5-30 W (NX-820(G))
- 5-30-45 W (NX-820H(G))
- ･800 MHz: 5-15 W (NX-920(G))
- VHF: 5-25 W (NX-720(G) for Europe)
- 260 Channel / Group ID with 128 Zones
- 6 Front PF keys & 4 Up / Down Selectors
- Emergency / AUX Key
- 10 Character Alphanumeric Aliases Display
- 4 W Speaker Audio
- Single Priority Scan (Conventional)
- DB-15 Accessory Connector
- Flash Firmware Upgrading
- MIL-Spec Standard Mic
- MIL-Spec 12-Key DTMF Mic Option Available
- MIL-STD-810 C / D / E / F / G
- MIL-STD “Driven-Rain”
- IP54 Water & Dust Intrusion
- Built in GPS Receiver
- (only “G” model. Optional GPS Active Antenna KRA-40G available)
For Digital
- NXDN® Digital Air Interface
- NXDN® Scrambler Included
- AMBE+2™ VOCODER
- 6.25 & 12.5 kHz Channels
- Over-the-Air Alias
- Over-the-Air Programming
- Digital Conventional Mode
- Digital Trunking Mode
- Mixed FM / Digital Operation (Conventional)
- Multi-Site IP Network Compatible
- Conventional IP Network Compatible
- Telephone Interconnect (Trunking)
For Analog
- 25, 20*1 & 12.5 kHz Channels
- FleetSync® / II, MDC-1200
- QT / DQT / DTMF
- 2-tone / 5-tone*1 Encode / Decode
- Voice Inversion Scrambler (16codes）
MDC-1200
- PTT ID ANI / Caller ID
- Emergency, Radio Check & Inhibit
- Emergency Status & Test Messages
- Radio Check
- Radio Inhibit
